3D simulation of President Trump’s wall based on his own specifications
According to Trump's requirements, the wall between Mexico and the United States will be a border with two very different realities. The American side will be an aesthetically pleasing construction with minimal impact on the surrounding landscape. The Mexican side will be a cold and impassable barrier intended to deter external attacks.

to rotate the wall



Security requirements
ANTI-CLIMBING
Must prevent a human from climbing the wall without assistance (no stairs or hooks).
US
MEXICO
6 feet
(1.83 m)
RESISTANCE
ANTI-TUNNELS
Must prevent tunnels from being dug underneath to a minimum depth of 6 feet (1.83 meters) below ground.
Should resist the creation of a physical hole, within one hour, of up to 12 inches using hammers, spikes or other tools.
Technical requirements
MATERIAL
Must be solid
reinforced concrete
HEIGHT
30 feet
(9 m)
Minimum
18 feet
(5.5 m)
US
MEXICO
6 feet
(1.83 m)
FOUNDATIONS
The type of foundation to be used for the wall has yet to be specified but it must prevent tunnels up to a minimum depth of 6 feet.
SLIDING RAILS
Must adhere to Border Patrol-approved standards for sliding gates that allow vehicles and pedestrians (25 and 50 feet) to pass.
US
24.2º
MEXICO
SLOPES
Design should facilitate construction in places with hills or slopes up to a gradient of 45 percent.
Aesthetic requirements
DRAINAGE
It should facilitate drainage
on its surface.
MEXICO
US
PLEASING TO THE EYE
COLOR / TEXTURE
Changes in color and texture should take place during manufacturing according to the location.
The northern side (the U.S. side) should be aesthetically pleasing in color, texture, etc.

Security requirements
ANTI-CLIMBING
Must prevent a human from climbing the wall
without assistance (no stairs or hooks).
US
MEXICO
6 feet
(1.83 m)
RESISTANCE
ANTI-TUNNELS
Must prevent tunnels from being dug underneath to a minimum depth of 6 feet (1.83 meters) below ground.
Should resist the creation of a physical hole, within one hour, of up to 12 inches using hammers, spikes or other tools.
Technical requirements
MATERIAL
Must be solid
reinforced concrete
HEIGHT
30 feet
(9 m)
Minimum
18 feet
(5.5 m)
US
MEXICO
6 feet
(1.83 m)
FOUNDATIONS
The type of foundation to be used for the wall has yet to be specified but it must prevent tunnels up to a minimum depth of 6 feet.
SLIDING RAILS
Must adhere to Border Patrol-approved standards for sliding gates that allow vehicles and pedestrians (25 and 50 feet) to pass.
US
24.2º
MEXICO
SLOPES
Design should facilitate construction in places with hills or slopes up to a gradient of 45 percent.
Aesthetic requirements
DRAINAGE
It should facilitate drainage
on its surface.
MEXICO
US
PLEASING TO THE EYE
COLOR / TEXTURE
Changes in color and texture should take place during manufacturing according to the location.
The northern side (the U.S. side) should be aesthetically pleasing in color, texture, etc.

Security requirements
ANTI-CLIMBING
Must prevent a human from climbing the wall without assistance (no stairs or hooks).
ANTI-TUNNELS
RESISTANCE
Must prevent tunnels from being dug underneath to a minimum depth of 6 feet (1.83 meters) below ground.
Should resist the creation of a physical hole, within one hour, of up to 12 inches using hammers, spikes or other tools.
US
MEXICO
6 feet
(1.83 m)
Technical requirements
MATERIAL
Must be solid
reinforced concrete
HEIGHT
30 feet
(9 m)
Minimum
18 feet
(5.5 m)
US
MEXICO
6 feet
(1.83 m)
FOUNDATIONS
The type of foundation to be used for the wall has yet to be specified but it must prevent tunnels up to a minimum depth of 6 feet.
SLIDING RAILS
Must adhere to Border Patrol-approved standards for sliding gates that allow vehicles and pedestrians (25 and 50 feet) to pass.
US
24.2º
MEXICO
SLOPES
Design should facilitate construction in places with hills or slopes up to a gradient of 45 percent.
Aesthetic requirements
DRAINAGE
It should facilitate drainage on its surface.
MEXICO
PLEASING TO THE EYE
The northern side (the U.S. side) should be aesthetically pleasing in color, texture, etc.
US
COLOR / TEXTURE
Changes in color and texture should take place during manufacturing according to the location.

Security requirements
ANTI-CLIMBING
Must prevent a human from climbing the wall without assistance (no stairs or hooks).
RESISTANCE
ANTI-TUNNELS
Should resist the creation of a physical hole, within one hour, of up to 12 inches using hammers, spikes or other tools.
Must prevent tunnels from being dug underneath to a minimum depth of 6 feet (1.83 meters) below ground.
US
MEXICO
6 feet
(1.83 m)
Technical requirements
SLIDING RAILS
MATERIAL
Must adhere to Border Patrol-approved standards for sliding gates that allow vehicles and pedestrians (25 and 50 feet) to pass.
Must be solid
reinforced concrete
HEIGHT
30 feet
(9 m)
Minimum
US
18 feet
(5.5 m)
US
MEXICO
24.2º
MEXICO
6 feet
(1.83 m)
FOUNDATIONS
SLOPES
The type of foundation to be used for the wall has yet to be specified but it must prevent tunnels up to a minimum depth of 6 feet.
Design should facilitate construction in places with hills or slopes up to a gradient of 45 percent.
Aesthetic requirements
DRAINAGE
It should facilitate drainage on its surface.
MEXICO
PLEASING TO THE EYE
The northern side (the U.S. side) should be aesthetically pleasing in color, texture, etc.
US
COLOR / TEXTURE
Changes in color and texture should take place during manufacturing according to the location.